High modulus MS polymer sealant adhesive DATAMS SEALANT, single-component, extrudable with standard sealant guns. Cures under the influence of atmospheric moisture to form a high-performance, permanently flexible elastic adhesive. Boasts good resistance to aging and weathering. Possesses exceptional thixotropy, with no sagging and clean break-off, does not form bubbles, seals on wet surfaces and in immersion.
Thanks to its characteristics, this sealant adhesive ensures excellent workability and easy finishing, with excellent adhesion without primer on all typical materials of industry and construction.

Characteristics:

• Adhesive sealant based on modified silane polymer (MS polymer)
• Single-component
• Without water, amines, solvents, and isocyanates, odourless
• Overpaintable with most water-based and solvent-based paints
• Suitable for nautical use
• EN 15651 – 1: Class 20 HM F – INT – EXT – CC
• EN 15651 – 3: Class XS3
• EN 15651 – 4: Class 20 HM PW – INT – EXT – CC
• ISEGA for food contact
• EMICODE EC 1 PLUS
• EUROFINS IAC GOLD
• Class A+ on emissions
• LEED iEQc 4.1
• SCAQMD 1168
• BAAQMD 8-51
• CARB VOC Regulation

Advantages:

• Good resistance to ageing and weathering
• Exceptional thixotropy, no dripping, with clean detachment
• Permanently flexible over a wide range of temperatures
• Seals on wet and in immersion
• Excellent workability and easy finishing, does not form bubbles
• Excellent neutral adhesion without primer, on all typical materials of industry and construction
• Suitable for the food industry

Areas of application:

• Suitable for bonding metals, stainless steel, aluminium, concrete, wood, glass, methacrylate, PVC, and other plastics to each other and themselves

Instructions for Use:

• The materials to be bonded must be clean, dry, free from grease, surface oxidation or dust, which can cause anti-adhesive effects
• It is recommended to wash metal surfaces with appropriate solvents