Cleaner for pressure reducers, usable on all types of reducers currently used in LPG and methane supply systems. Cleans oily and sulphurous residues from the internal parts of the gas pressure reducer.

Characteristics:

• Usable on all types of reducers currently used in LPG and methane supply systems

Advantages:

• Cleans the internal parts of the gas pressure reducer from oily and sulphurous residues.
• Contains non-aggressive degreasers for rubber parts such as membranes and O-rings.

Areas of application:

• LPG and methane engines

Instructions for Use:

• Disconnect the pipe that carries the gas to the pressure reducer. Disconnect the flexible hose that from the pressure reducer carries the gas to the injectors, but leave the first section of the pipe attached to the gas pressure reducer.
• Spray half of the product into the gas inlet hole inside the reducer, keeping the end of the flexible outlet hose higher than the reducer so that the product does not leak and simultaneously fills the entire interior of the reducer.
• Leave to act for 5 minutes, then let the residues flow from the pressure reducer by positioning the gas outlet hose lower than the reducer
• At the same time, spray the other half of the product inside the reducer for rinsing, always allowing everything to flow out through the flexible outlet hose.
• Restore the system and proceed with the appropriate adjustments.

Warnings:

• In the presence of a solenoid valve preventing the introduction of the product into the pressure reducer, open the solenoid valve by electrically supplying it with 12 V
• Do not introduce aggressive solvents into the pressure reducer that could damage seals and membranes.